Instructions

  1. Adjust your iron to the setting specified in the glove's wash and care instructions

  2. Remove the paper backing to expose the adhesive. Place the emitips™ strip in the desired position on your glove.

  3. Before permanently adhering emitips™ to your glove, try operating your touchscreen device. When you are satisfied with the placement of the emitips™, remove the glove and proceed to step 4.

  4. Place the glove flat on an ironing board. Place the preheated iron directly on top of the emitips™ strip and apply frim even pressure for 3 seconds. CAUTION: To avoid injury, ensure hands are fully removed from gloves prior to ironing.

  5. Allow the emitips strip to cool for 1 minute. Repeat the above steps for the rest of your emitips strips as desired.

 

*While the performance of emitips™ is best when permanently adhered, if you are not satisfied with the emitips™ performance while temporarily placed on your glove,we are more than happy to provide you with a full refund, less shipping and handling.